Crestron DM-TX-4KZ-302-C

Product Description

The DM‑TX‑4KZ‑302‑C provides a versatile interface for ultra high-definition AV and computer sources as part of a complete Crestron® DigitalMedia™ system. It functions as a DM 8G+® transmitter and switcher with HDMI® and DisplayPort™ inputs and as a control module, providing RS-232 and IR control ports, plus Ethernet and USB HID ports for a total connectivity solution.

Its low-profile, surface-mountable design makes the DM‑TX‑4KZ‑302‑C ideal for installation beneath a conference table, inside a lectern or equipment rack, or at virtually any other location in a boardroom, classroom, auditorium, or residence. It connects to the head end or display location using a single CAT type twisted pair cable. In addition to DM 8G+, it is also compatible with HDBaseT® standard, which allows it to be connected directly to the input of an HDBaseT certified display device.1

  • 4K DigitalMedia 8G+® transmitter and multimedia interface
  • Built-in 3×1 AV switcher with two HDMI® inputs and one DisplayPort™ input3
  • QuickSwitch HD™ technology manages HDCP keys for fast, reliable switching
  • Connects to a DM® switcher or receiver over a single CAT type twisted pair cable1
  • Supports cable lengths up to 330 ft (100 m) for all resolutions up to UHD and 4K using DM Ultra cable1
  • Supports cable lengths up to 330 ft (100 m) for 1080p, WUXGA, and 2K using DM 8G® cable or CAT5e1
  • Supports cable lengths up to 230 ft (70 m) for UHD and 4K using DM 8G cable, or 165 ft (50 m) using CAT5e1
  • HDBaseT® Certified standard — Enables direct connection to other HDBaseT certified equipment
  • Local HDMI output (DVI compatible6)
  • Handles 3D video and Deep Color
  • Handles Dolby® TrueHD, Dolby Atmos®, DTS HD®,DTS:X®, and uncompressed 7.1 linear PCM audio
  • HDCP 2.2 compliant
  • Performs automatic AV signal format management via EDID
  • Enables device control via CEC, IR, RS-232, and Ethernet
  • Enables USB HID signal extension for a local computer5
  • Compatible with Crestron® USB over Ethernet Extenders7
  • Compatible with Crestron Connect It™ Cable Caddies8
  • Powered via the DM connection or optional power pack, PW‑2412WU, (sold separately)4,5

 

Maximum Cable Lengths
Resolution DM-CBL-ULTRA DM® Ultra Cable DM-CBL-8G DM 8G® Cable CAT5e (or better) [1]
1920×1080 FHD 1080p 330 ft (100 m) 330 ft (100 m) 330 ft (100 m)
1920×1200 WUXGA
1600×1200 UXGA
2048×1080 DCI 2K
2048×1152 QWXGA
2560×1080 UWFHD 230 ft (70 m) 165 ft (50 m)
2560×1440 WQHD
2560×1600 WQXGA
3840×2160 4K UHD
4096×2160 DCI 4K
Maximum Resolutions
Scan Type Resolution Frame Rate Color Sampling Color Depth
Progressive 4096×2160 DCI 4K & 3840×2160 4K UHD 24 Hz 4:4:4 36 bit
30 Hz 4:4:4 36 bit
60 Hz 4:2:2 36 bit
60 Hz 4:4:4 24 bit
2560×1600 WQXGA 60 Hz 4:4:4 36 bit
1920×1080 HD 1080p 60 Hz 4:4:4 36 bit
Interlaced 1920×1080 HD 1080i 30 Hz 4:4:4 36 bit
Video
Switcher 3×1 manual or auto-switching, Crestron QuickSwitch HD technology
Input Signal Types HDMI w/HDR10, Deep Color, 3D, & 4K60 4:4:4 support 2 (DVI & Dual-Mode DisplayPort™ compatible 3); DisplayPort w/Deep Color & 4K60 4:4:4 support 2
Output Signal Types DM 8G+ & HDBaseT w/, Deep Color, 3D, & 4K60 4:4:4 support; HDMI w/HDR10, Deep Color, 3D, & 4K60 4:4:4 support 2 (DVI compatible 6)
Copy Protection HDCP 2.2
Audio
Switcher 3×1 audio-follow-video
Input Signal Types HDMI (Dual-Mode DisplayPort compatible 3), DisplayPort
Output Signal Types DM 8G+ & HDBaseT, HDMI
Formats, HDMI Dolby Digital®, Dolby Digital EX, Dolby Digital Plus, Dolby® TrueHD, Dolby Atmos®, DTS®, DTS-ES, DTS 96/24, DTS HD High Res, DTS HD Master Audio™,DTS:X, LPCM up to 8 channels
Formats, DisplayPort Dolby Digital®, Dolby Digital EX, Dolby Digital Plus, Dolby® TrueHD, DTS®, DTS-ES, DTS 96/24, DTS-HD High Res, DTS-HD Master Audio™, LPCM up to 8 channels
Communications
Ethernet 10/100 Mbps, auto-switching, auto-negotiating, auto-discovery, full/half duplex, DHCP
USB Host Supports signal extension of USB HID class devices, supports a TT-100 series cable caddy 8
USB Device USB HID signal extension to a USB host, supports computer console (for setup)
RS-232 2-way device control and monitoring up to 115.2k baud with hardware and software handshaking (via control system)
IR/Serial 1-way device control via infrared up to 1.1 MHz or serial TTL/RS-232 (0-5 V) up to 19.2k baud (via control system)
DigitalMedia DM 8G+, HDCP 2.2, EDID, CEC, PoDM + Ethernet
HDBaseT HDCP 2.2, EDID, RS-232, PoE+, Ethernet
HDMI HDCP 2.2, EDID, CEC

NOTE: Supports management of HDCP and EDID; supports management of CEC between the connected HDMI devices and a control system.

DisplayPort HDCP 2.2, EDID
Connectors
24 VDC 1.0 A (1) 2.1 x 5.5 mm DC power connector;
24 VDC power input;
PW‑2412WU, optional power pack (sold separately)
DM OUT (1) 8-pin shielded RJ-45, female;
DM 8G+ output, HDBaseT compliant;
PoDM+ PD port (HDBaseT PoE+ compatible) 4,5;
Connects to the DM 8G+ input of a DM switcher, receiver, or other DM device, or to a HDBaseT device, via CAT5e or Crestron DM‑CBL‑8G cable, or Crestron DM‑CBL‑ULTRA cable 1
HDMI OUT (1) HDMI Type A, female;
HDMI digital video/audio output (DVI compatible 62
HDMI IN 1 – 2 (2) HDMI Type A, female;
HDMI digital video/audio inputs;
(DVI & Dual-Mode DisplayPort compatible 32
DISPLAY PORT IN (1) DisplayPort, female;
DisplayPort digital video/audio input 2
USB HID (1) USB Type A, female;
SB 2.0 host port for connection of a mouse/keyboard or other USB HID-compliant device (USB signal extension & routing), or for connection of a Crestron TT-100 series device (Crestron Connect It) 8
COMPUTER (1) USB Type B, female;
USB 2.0 device port for computer console (setup), or for connection to a computer or other USB HID-compliant host (USB signal extension & routing)
LAN (1) 8-pin RJ-45, female;
10Base-T/100Base-TX Ethernet port
COM (1) 5-pin 3.5 mm detachable terminal block;
Bidirectional RS-232 port;
Up to 115.2k baud, hardware and software handshaking support
IR (1) 2-pin 3.5 mm detachable terminal block;
IR/Serial port;
IR output up to 1.1 MHz;
1-way serial TTL/RS-232 (0-5 V) up to 19200 baud
Ground (1) 6-32 screw;
Chassis ground lug
Controls & Indicators
24 VDC (1) Green LED, indicates operating power supplied via PoDM+, HDBaseT PoE+, or the optional PW‑2412WU power pack (sold separately)
DM OUT (2) LEDs, green LED indicates DM link status, amber LED indicates video and HDCP signal presence
HDMI OUT (1) Green LED, indicates HDMI signal presence at the HDMI output
HDMI IN 1 – 2 (2) Green LEDs, each indicates HDMI signal presence at the corresponding HDMI input
DISPLAY PORT IN (1) Green LED, indicates video signal presence at the DisplayPort input
LAN (2) LEDs, green LED indicates Ethernet link status, amber LED indicates Ethernet activity
SETUP (1) Red LED and (1) recessed pushbutton for Ethernet setup
RESET (1) Recessed pushbutton for hardware reset
Power
Power over DM (PoDM) IEEE 802.3at Type 2 Class 4 (25.5 W) compliant PoDM+ PD (Powered Device), capable of being powered by a PoDM+ PSE (Power Sourcing Equipment) 4
Power over HDBaseT IEEE 802.3at Type 2 Class 4 (25.5 W) compliant HDBaseT PoE+ PD (Powered Device), capable of being powered by an HDBaseT PoE+ PSE (Power Sourcing Equipment) 5
Power pack (optional) Input: 100-240 VAC, 50/60 Hz
Output: 1.25 A @ 24 VDC
Model: PW‑2412WU (sold separately)
Power Consumption 12.6 Watts typical using power pack;
13.4 Watts typical using PoDM+ or HDBaseT PoE+;
(without a USB powered device connected)

Resources:

https://www.crestron.com/getmedia/236c37c1-6521-4581-ae31-bad5058cee49/ss_dm-tx-4kz-302-c

<< return to products